Worldwide ShippingNo Account Needed to Start a Coil BriefSupport in English and Spanish
Worldwide ShippingNo Account Needed to Start a Coil BriefSupport in English and Spanish
Worldwide ShippingNo Account Needed to Start a Coil BriefSupport in English and Spanish
Worldwide ShippingNo Account Needed to Start a Coil BriefSupport in English and Spanish
Worldwide ShippingNo Account Needed to Start a Coil BriefSupport in English and Spanish
Custom Condenser Coils.
Custom commercial condenser coils built around your installation’s dimensions, connections, and construction requirements. Request a replacement or retrofit through Coil Brief; Rowform reviews the details before confirming the proposed design.
Tube-and-fin condenser coil · Illustrative construction
What does a condenser coil do?
A condenser coil transfers heat from refrigerant to the surrounding air. Hot, high-pressure refrigerant enters from the compressor and releases heat as air moves across the coil. As it loses heat, the refrigerant changes from a vapor into a liquid, ready for the next stage of the cooling cycle.
In a fin-and-tube condenser coil, refrigerant flows inside the tubes while air passes between the fins. The fins increase the surface area available for heat transfer. Together, the tubes, fins, and airflow help release the heat collected during cooling.
//Coil selection
What matters when selecting a condenser coil?
The right condenser coil depends on the heat to be rejected, airflow, refrigerant, and installation requirements.
Consideration
What to review
Heat rejection
System requirements and outdoor operating conditions
Airflow and pressure drop
Available airflow, fan capability, rows, and fin spacing
Refrigerant and circuiting
Refrigerant, circuit arrangement, and connection requirements
Materials and environment
Material compatibility, exposure, and corrosion protection
Fit and installation access
Dimensions, mounting, connections, and removal space
Replacing an existing coil? Start with its measurements or drawing.
Operating data is not required to begin a measurement-based replacement request. Refrigerant and circuit details still need to be confirmed.
Relative material cost. Final pricing depends on coil specifications.
Casing
The formed frame supports and protects the coil.
Final specifications are reviewed in your Coil Brief.
Refrigerants for commercial HVAC
Your system’s refrigerant helps determine the coil’s materials, pressure requirements, and design.
R-410A
Used in many existing HVAC systems.
R-32
Used in newer HVAC equipment.
R-454B
Used in newer HVAC equipment.
Examples shown. Refrigerants vary by equipment and application.
Specify your system’s refrigerant in your Coil Brief. Each coil is designed for its stated refrigerant and operating conditions.
Replacement and order details
OEM replacements
Discontinued or unknown model? Start with measurements or a drawing.
Independent aftermarket replacements. Rowform is not affiliated with or endorsed by these brands.
An unavailable or discontinued OEM condenser coil can be reviewed for a custom replacement built around the existing installation. Rowform evaluates the dimensions, connections, construction, and refrigerant details before confirming whether the replacement can be supplied.
Start with measurements or an existing drawing in Coil Brief. Equipment brand, model, and nameplate photos can support identification, but a model number alone does not confirm fit. Review the proposed dimensions, connections, and construction on the engineering drawing before approval.
Rowform supplies independent aftermarket replacements and is not affiliated with or endorsed by these equipment brands.
Dimensions and mounting
Request casing dimensions, finned height and width, coil depth, and mounting details to suit the installation. The proposed dimensions and mounting arrangement are documented for review on the engineering drawing.
Connections and orientation
Specify connection sizes, locations, and orientation around your existing piping and available space. Rowform reviews the requested layout with the coil construction so you can check the proposed connections before production.
Fin spacing and circuiting
Fin spacing (fins per inch, or FPI), row count, tube arrangement, and refrigerant circuiting can be specified for engineering review. Rowform confirms the proposed construction; matching outside dimensions alone does not establish equivalent performance.
Refrigerant and materials
Request tube and fin materials for the system’s refrigerant and operating environment. Material choices and refrigerant requirements are reviewed together before the proposed coil specification is confirmed.
Nano Coating, E-Coating, and optional hydrophilic fin treatment.
Select No Coating, Nano Coating, or E-Coating in the Coil Protection step of Coil Brief. Use Help me choose to compare Nano Coating and E-Coating for your coil’s environment.
Nano Coating is a clear coating; E-Coating provides an epoxy barrier. Hydrophilic fin treatment is a separate optional add-on that helps water spread and drain from the fins. Added treatments are priced in your quote.
Your quote separates manufacturing and transit estimates.
We aim to manufacture coils in less than three weeks. Timing varies by coil specifications and quantity. Production begins after the required approvals and payment are complete and Rowform authorizes manufacturing.
This is a manufacturing target, not a guaranteed delivery time. Your quote will state the estimated manufacturing and delivery times for your request so you can plan both production and transit.
Expedited production and shipping are not currently available.
12-month limited warranty
Coverage begins at documented delivery.
Coverage starts at documented delivery and covers qualifying manufacturing and material defects. Registration is not required.
Freezing damage and corrosion caused by unsuitable fluids, chemicals, or environmental exposure are excluded. Review the full coverage, exclusions, and remedies before ordering.
Check dimensions, connections, materials, circuiting, and any selected coating before approving the engineering drawing. Contact Rowform about discrepancies.
Submitting a Coil Brief does not place an order or require payment. Coil Record keeps your project documents and order updates together.
Yes. Equipment model and part numbers are optional. Provide the required coil details through measurements or drawings and specifications. Rowform reviews your submission and follows up if more information is needed.
Yes. Coil Brief accepts replacement requests based on the required coil measurements, construction details, and refrigerant/circuit information. Airflow, operating conditions, and performance specifications are not required for the measurement pathway. For a request based on operating requirements, email support@rowformcoils.com.
Yes. Include the requested fin spacing (FPI), row count, tube arrangement, and available circuit information in your replacement request. Rowform reviews these requirements before confirming the proposed construction. Do not guess at hidden circuit details; identify information that needs clarification.
Share the requested refrigerant and circuit details from the existing coil or available documentation. If a detail is unknown, use the measurement guidance or contact Rowform for clarification. Photos can support the review but do not establish hidden circuiting; additional information may be needed before the proposed design is confirmed.
Yes. Rowform can review an unavailable or discontinued OEM coil for a custom replacement. Submit the required coil measurements or an existing drawing through Coil Brief. Equipment identifiers and photos are optional supporting information for the measurement pathway. Feasibility and the proposed specification are confirmed through review.
Rowform can review a replacement designed around the existing casing dimensions, mounting requirements, and connection layout. Provide the measurements or an existing drawing so the proposed arrangement can be assessed. Confirm the dimensions, orientation, and connections on the engineering drawing before approving it.
Yes. Choose the drawings or specifications route in Coil Brief and supply the documents that describe the coil you need. Rowform reviews the submitted information for completeness.
We aim to manufacture coils in less than three weeks, depending on specifications and quantity. Production begins after the required approvals and payment are complete and Rowform authorizes manufacturing. Your quote includes estimated manufacturing and delivery times; the manufacturing target is not a guaranteed delivery time. Expedited production and shipping are not currently available.
